Wednesday, February 24, 2016

Journeyman Electrician Practice Test



Take this free Practice exam to get a sample of the types of questions on an actual Journeyman Electrician's Exam
The subject matter covered in most electrical licensing examinations is: grounding and bonding, overcurrent protection, wiring methods and installation, boxes and fittings, services and equipment, motors, special occupancies, load calculations, lighting, appliances, box and raceway fill, hazardous locations, trade knowledge and electrical theory.
To prepare for your state Journeyman Electrician License Exam, see The Complete Journeyman Electrician Practice Exams with Review and Testing Tips by Ray Holder, Master Electrician and Certified Electrical Trade Instructor.


1. Conductors with _____ marked on the insulation are NOT approved for use in a wet location.
a. THW
b. THHW
c. THHN
d. THWN
2. A one-family dwelling unit with a demand load of 200 amperes is supplied with a 120/240 volt, single-phase, electrical system from the local utility company. What is the MINIMUM size aluminum THW conductors required for use as service-entrance conductors for this residence?
a. 1/0 AWG
b. 4/0 AWG
c. 3/0 AWG
d. 2/0 AWG
3. Where a 150 kVA, single-phase transformer having a secondary voltage of 120/240 is installed at a multi-family dwelling, the full-load current rating, in amperes, of the secondary is _____.
a. 625 amperes
b. 265 amperes
c. 526 amperes
d. 1250 amperes
4. Which one of the following listed circuit breakers is NOT a standard ampere rating?
a. 75 amperes
b. 90 amperes
c. 110 amperes
d. 225 amperes
5. The MINIMUM length of free conductor to be left at each junction box for the purpose of splicing conductors, or making connections to luminaires or devices shall be _____ .
a. 4 inches
b. 10 inches
c. 8 inches
d. 6 inches
6. In general, overhead service-drop conductors shall NOT be smaller than _____.
a. 2 AWG copper
b. 4 AWG copper
c. 6 AWG copper
d. 8 AWG copper
CDA Practice Test
7. When a galvanized eye-bolt is to be used as the point of attachment for an electrical service, the NEC® requires the eye-bolt to be installed NOT less than _____ above finished grade.
a. 8 ft.
b. 10 ft.
c. 12 ft.
d. 15 ft.
8. Why is electrical continuity required for metallic conduit?
a. To reduce voltage drop.
b. To limit galvanic corrosion.
c. To establish an effective ground-fault path and facilitate the operation of the overcurrent protective device.
d. To reduce electrolysis.
9. In dwelling units, receptacle outlets installed for countertop surfaces, must be located above, but NOT more than _____ above the countertop.
a. 12 inches
b. 18 inches
c. 20 inches
d. 24 inches
10. When conductors are installed in a conduit or tubing nipple of _____ or less in length, the ampacity adjustment factors for more than three (3) current-carrying conductors in the raceway, are not required to be applied.
a. 24 inches
b. 30 inches
c. 36 inches
d. 48 inches
11. What is the most hazardous classification on a job site?
Class I, Division 1
Class III, Division 2
Class II, Division 1
Class III, Division 1
12. The ___________ dimensions of a building should be measureed when determining the area to calculate the required lighting load.
inside and outside
inside
outside
None of the above.

***GREAT PAY > http://www.tests.com/practice/journeyman-electrician-practice-test

How to Show Hidden Files and Folders in Windows 10


To show the files and folders automatically hidden in your Windows 10 computer, you can use one of the two methods introduced in the text.
Video guide on how to show hidden files and folders in Windows 10:

2 ways to show hidden files and folders in Windows 10:

Way 1: Show hidden files and folders in the View menu.
Step 1: Open This PC.
Double-click This PC on the desktop to open it.
Tips:
1. If you have no idea how to add This PC to the desktop, please refer to How to Add Desktop Icons on Windows 10.
2. You can also open another folder such as Network, File Explorer, Recycle Bin, etc.
Step 2: Show the hidden files and folders in the View menu.
Click View, tap Show/hide in the menu, and check the small box before Hidden items in the sub-list.
Way 2: Show hidden files and folders in the Folder Options.
Step 1: Open Folder Options.
Open This PC, click View and select Options.
Step 2: Show the hidden files and folders in the View settings.
In the Folder Options window, choose View, select Show hidden files, folders, and drives, and then click OK.
Now, go ahead to put them into practice, and you can show the hidden files and folders on your PC.
Related Articles:

Cigarette Racing w/ vids

IF YOU'VE SEEN ONE, YOU'VE SEEN ONLY ONE...

From artisans who create each component to the list of "standard" equipment--that is anything but standard--to the world-class facility that houses the legendary brand, when you say "Cigarette" you define excellence. And, when you buy a Cigarette you become a member of a club comprised of those who value the fine details and demand only the BEST.

The ultimate Cigarette Difference? There are many. The ride. The speed. The handling. Where large swells and waves are rendered impotent by the classic V-hull construction. A Cigarette indeed, is Different--and that is only part of The Cigarette Difference.

Image result for cigarette boat pic

LEGENDS ARE NOT BORN--THEY ARE CREATED.

Since 1969, the dedicated people at Cigarette Racing Team have focused on building the finest high-performance boats the world has ever known. That's why Cigarette® has become a world-renowned brand, known for its unparalleled quality and performance. The simple truth is there is nothing quite like a Cigarette® brand offshore powerboat.

Our objective is clear: to create superior offshore powerboats that live up to the Cigarette® brand's unrivaled reputation for performance, dependability, and value. In our commitment to this goal, we continue to build legendary products.
Image result for cigarette boat pic






Better Nutrition


10 tips for smarter, more efficient Internet searching

These days, everyone is expected to be up to speed on Internet search techniques. But there are still a few tricks that some users -- and even savvy searchers -- may not be aware of.

Did you hate memorizing seemingly insignificant facts for tests at school? No photographic memory? Good news! Life is now an open-book exam — assuming you have a computer, browser, and Internet access. If you know how to use a good search engine, you don't have to stuff your mind with facts that are useful only when playing Jeopardy! and Trivial Pursuit.
Chances are, you aren't the first person to run across the problem you are experiencing. Chances are also good that an answer is awaiting your discovery on the Internet — you just have to remove the irrelevant pages and the unhelpful/incorrect results to find that needle in the haystack.
Google has been fanatical about speed. There is little doubt that it has built an incredibly fast and thorough search engine. Unfortunately, the human element of the Internet search equation is often overlooked. These 10 tips are designed to improve that human element and better your Internet search skills. (Note: All examples below refer to the Google search engine.)
This article is also available as a PDF download.

1: Use unique, specific terms

It is simply amazing how many Web pages are returned when performing a search. You might guess that the terms blue dolphin are relatively specialized. A Google search of those terms returned 2,440,000 results! To reduce the number of pages returned, use unique terms that are specific to the subject you are researching.

2: Use the minus operator (-) to narrow the search

How many times have you searched for a term and had the search engine return something totally unexpected? Terms with multiple meanings can return a lot of unwanted results. The rarely used but powerful minus operator, equivalent to a Boolean NOT, can remove many unwanted results. For example, when searching for the insect caterpillar, references to the company Caterpillar, Inc. will also be returned. Use Caterpillar -Inc to exclude references to the company or Caterpillar -Inc -Cat to further refine the search.

3: Use quotation marks for exact phrases

I often remember parts of phrases I have seen on a Web page or part of a quotation I want to track down. Using quotation marks around a phrase will return only those exact words in that order. It's one of the best ways to limit the pages returned. Example: "Be nice to nerds".Of course, you must have the phrase exactly right — and if your memory is as good as mine, that can be problematic.

4: Don't use common words and punctuation

Common terms like a and the are called stop words and are usually ignored. Punctuation is also typically ignored. But there are exceptions. Common words and punctuation marks should be used when searching for a specific phrase inside quotes. There are cases when common words like the are significant. For instance, Raven and The Raven return entirely different results.

5: Capitalization

Most search engines do not distinguish between uppercase and lowercase, even within quotation marks. The following are all equivalent:
  • technology
  • Technology
  • TECHNOLOGY
  • "technology"
  • "Technology"

6: Drop the suffixes

It's usually best to enter the base word so that you don't exclude relevant pages. For example, bird and not birdswalk and not walked. One exception is if you are looking for sites that focus on the act of walking, enter the whole term walking.

7: Maximize AutoComplete

Ordering search terms from general to specific in the search box will display helpful results in a drop-down list and is the most efficient way to use AutoComplete. Selecting the appropriate item as it appears will save time typing. You have several choices for how the AutoComplete feature works:
Use Google AutoComplete. The standard Google start page will display a drop-down list of suggestions supplied by the Google search engine. This option can be a handy way to discover similar, related searches. For example, typing in Tucson fast will not only bring up the suggestion Tucson fast food but also Tucson fast food couponsUse browser AutoComplete. Use this Google start page to disable the Google AutoComplete feature and display a list ofyour previous searches in a drop-down box. I find this particularly useful when I've made dozens of searches in the past for a particular item. The browser's AutoComplete feature must be turned on for this option to work. Click one of these links for instructions detailing how to turn AutoComplete on or off in I.E.and Firefox.
Examples:
  • Visual Basic statement case
  • Visual Basic statement for
  • Visual Basic call

8: Customize your searches

There are several other less well known ways to limit the number of results returned and reduce your search time:
  • The plus operator (+): As mentioned above, stop words are typically ignored by the search engine. The plus operator tells the search engine to include those words in the result set. Example: tall +and short will return results that include the word and.
  • The tilde operator (~): Include a tilde in front of a word to return results that include synonyms. The tilde operator does not work well for all terms and sometimes not at all. A search for ~CSS includes the synonym style and returns fashion related style pages —not exactly what someone searching for CSS wants. Examples: ~HTML to get results for HTML with synonyms;~HTML -HTML to get synonyms only for HTML.
  • The wildcard operator (*): Google calls it the fill in the blank operator. For example, amusement * will return pages with amusement and any other term(s) the Google search engine deems relevant. You can't use wildcards for parts of words. So for example, amusement p* is invalid.
  • The OR operator (OR) or (|): Use this operator to return results with either of two terms. For example happy joy will return pages with both happy andjoy, while happy | joy will return pages with either happy or joy.
  • Numeric ranges: You can refine searches that use numeric terms by returning a specific range, but you must supply the unit of measurement. Examples: Windows XP 2003..2005PC $700 $800.
  • Site search: Many Web sites have their own site search feature, but you may find that Google site search will return more pages. When doing research, it's best to go directly to the source, and site search is a great way to do that. Example: site:www.intel.com rapid storage technology.
  • Related sites: For example, related:www.youtube.com can be used to find sites similar to YouTube.
  • Change your preferences: Search preferences can be set globally by clicking on the gear icon in the upper-right corner and selecting Search Settings. I like to change the Number Of Results option to 100 to reduce total search time.
  • Forums-only search: Under the Google logo on the left side of the search result page, click More | Discussions or go to Google Groups. Forums are great places to look for solutions to technical problems.
  • Advanced searches: Click the Advanced Search button by the search box on the Google start or results page to refine your search by date, country, amount, language, or other criteria.
  • Wonder Wheel: The Google Wonder Wheel can visually assist you as you refine your search from general to specific. Here's how to use this tool:
  1. Click on More Search Tools | Wonder Wheel in the lower-left section of the screen (Figure A) to load the Wonder Wheel page.
  2. Click on dbms tutorial (Figure B).

Figure A

Figure B

As you can see in Figure C, Google now displays two wheels showing the DBMS and dbms tutorial Wonder Wheels, with the results for dbms tutorial on the right side of the page. You can continue drilling down the tree to further narrow your search. Click the Close button at the top of the results to remove the Wonder Wheel(s).

Figure C

9: Use browser history

Many times, I will be researching an item and scanning through dozens of pages when I suddenly remember something I had originally dismissed as being irrelevant. How do you quickly go back to that Web site? You can try to remember the exact words used for the search and then scan the results for the right site, but there is an easier way. If you can remember the general date and time of the search you can look through the browser history to find the Web page.

10: Set a time limit — then change tactics

Sometimes, you never can find what you are looking for. Start an internal clock, and when a certain amount of time has elapsed without results, stop beating your head against the wall. It's time to try something else:
  • Use a different search engine, like Yahoo!BingStartpage, or Lycos.
  • Ask a peer.
  • Call support.
  • Ask a question in the appropriate forum.
  • Use search experts who can find the answer for you.

The bottom line

A tool is only as useful as the typing fingers wielding it. Remember that old acronym GIGO, garbage in, garbage out? Search engines will try to place the most relevant results at the top of the list, but if your search terms are too broad or ambiguous, the results will not be helpful. It is your responsibility to learn how to make your searches both fast and effective.
The Internet is the great equalizer for those who know how to use it efficiently. Anyone can now easily find facts using a search engine instead of dredging them from the gray matter dungeon — assuming they know a few basic tricks. Never underestimate the power of a skilled search expert.

Free Legal Advice


Featured Posts

Beautiful American Bully Pups for Sale

 

Popular Posts